Stenter Machine
TEXTINNO, a culmination of Ehwha Glotech’s experience and technical capability, is eco-friendly and ergonomically designed to improve energy reduction and productivity.
Uniform temperatures inside the chamber
Uniform temperatures inside the chamber. Temperatures inside the chamber remain evenly distributed as radiant heat is completely blocked by separating heat-spraying space and circulation space with a baffle plate.
Better quality is achieved with a vertical-spraying
Better quality achieved with vertical-spraying As calibrating a sloped angle generated by the inertia-induced flow by sloping at a punching section on the nozzle, vertically spraying on a processed side enhances quality since it works as an air cushion.
Specialized nozzle for quality processing
– Possible to carry out the best quality processing as the best suitable nozzle can be selected for the processed one. – Achievable to minimize differences between nozzles in wind velocity by putting a baffle wall on the mixing duct
Flat-type punching nozzle
Slot-type nozzle
M-type punting nozzle
Optimal temperatures control
Achievable to control temperatures in a steady manner without energy waste since optimized PLC automation systems and high turn-down ratio(1:40) gas burner are used
Minimized loss of surface heat spreading
Achievable to minimize heat loss leaking out of the chamber as a good-performing insulation material is used.
Double-screen filter
The double-screen filter is used, making it possible to do cleaning during the operation and shorten the down time leading to minimize energy waste.
Precise speed and overfeed controlling
Realized precise speed controlling with a non-slip IPM motor applied
Productivity is maximized since the overfeed controlling is flexible enough to meet various processing conditions for its ranges from -10% to +80%, up to the velocity of the chained conveyer
Minimized loss of surface heat spreading
Minimized the rolling of selvage since minimum amount of tensile is used for delivery by installing selvage expanding texter and pinning device as close as possible to each other
Ultra-precise pinning speed controlling is realized with the non-slip IPM application.
Maximized dewaterability for each textile
Realized the maximized dewaterability with differently applied rubber hardness in accordance with natural, chemical, blend textiles and etc